Product name： Low Voltage Tape
Product category： Electrical Insulating Tape
Product color：
     L1000 rubber tape is a self amalgamating,low voltage rubber tape which meets the requirements of ASTM D4388,type1.It easily confirms to irregular shapes and surfaces yielding a void free.electrically stable build-up. L1000 rubber tape is  compatible with all extruded dielectric cable insulation.
GENERAL PURPOSE INSULATING TAPE FOR USE UNDER 1000V
Self-amalgamating
Good electrical properties
Effective moisture seal
Good conformability
RECOMMENED USES:For insulating of splices on solid dielectric cable under 1000V in conjunction with a jacketing tape.
INSTALLATION TECHNIQUES:Tape should be stretched during half-wrapping so that the tape width is reduced to 3/4 of its original width.Overlap at least two layers of PVC tape outside of the rubber tape to provide physical protection.
Shelf life & Storage:This product has a 2-year shelf life from date of manufacture when stored in a normal temperature with ventilated place.
Product performance：

Tear strength：	≥0.5MPa
Elongation at break：	≥400%
Insulation resistivity：	1x1011 Ω•cm
Breakdown strength：	≥5kV/mm
Self-cohesion：	≥1.5N

 
The above data are the general average value for reference only. The actual product data are based on the actual test results.