Product Name： Medium Voltage Tape
Product Category： Electrical Insulating Tape
Product Color：
     Special rubber belts have high tensile strength, high elongation, good resilience, high voltage resistance, excellent air tightness, excellent weather resistance and aging resistance; strong corrosion resistance, non-water absorption, high voltage resistance and volume resistivity hardly decrease in water and humid environment; after wrapping, the insulating layer melts into one and never falls off. Solid, neat and clean. It also has super self-stickiness, flexibility and resilience.
Recommanded Uses：
It can be used for insulation protection of 10 kV (M10), 20 kV (M20) and 35 kV (M35) and lower voltage wires and cables, as well as for insulation sealing of communication cable joints. It can also be used for pipeline protection, repair and waterproof sealing.
Remove the isolation film from the self-adhesive tape, stretch about 200% and wrap the self-adhesive tape in a semi-layered and multi-layered way around the object which needs insulation or waterproof sealing protection. Then wrap the "wanshida"PVC adhesive tape in its outer layer as the protective layer.
Selflife and Storage：
Under normal temperature and ventilation conditions, the self-made date is valid for 3 years.
Product Performance：

Tear strength：	≥1.0MPa
Elongation at break：	≥500%
Insulation resistivity：	1x1012 Ω•cm
Breakdown strength：	≥15kV/mm
Self-cohesion：	≥3.0N

 
The above data are the general average value for reference only. The actual product data are based on the actual test results.