Product Name：High Voltage Tape 
Product Category： Electrical Insulating Tape
Product Color：
     H69-W230 is an ethylene propylene rubber based high voltage tape possessing  superior  electrical,and  thermal
properties.It is a self-amalgamating tape that fuses quickly yielding a void-free,electrically stable build-up.H69-W230 is compatible with all extruded dielectric cable insulation.
INSULATING AND JACKTING TAPE FOR USE THRU 69kV
Self-amalgamating
Outstanding corona and ozone resistance
Superior electrical properties
UV resistant
Excellent moisture-resistance
Corrosion and chemical resistance
Peak temperature 130℃.
Meet Reach.
RECOMMENED USES:For insulating and jacketing of splices on power cable from 600V through 69kV and for building stress and jacketing of terminations on power cable from 600V through 35kV.As a major component in transition joint construction.
INSTALLATION TECHNIQUES:Tape should be stretched during half-wrapping so that the tape width is reduced to 3/4 of its original width.Overlap at least two layers of PVC tape outside of the rubber tape to provide physical protection.
Shelf life & Storage:This product has a 2-year shelf life from date of manufacture when stored in a normal temperature with ventilated place.
 
Important Statement：
Wanshida Group shall not be liable for any loss or liability arising from the use of the product beyond the scope of application.
Product Performance：

Tear strength：	≥1.2MPa
Elongation at break：	≥800%
Insulation Resistivity：	1x1012 Ω•cm
Breakdown Strength：	≥18kV/mm
Self-cohesion：	≥5.0N

 
The above data are the general average value for reference only. The actual product data are based on the actual test results.