Product Name：Professional Ethylene-propylene Rubber Self-adhesive Tape
Product Category： Electrical Insulation Tape
Product Color：
     Special rubber belt has high tensile strength, high elongation, good resilience, high voltage resistance, excellent air tightness, excellent weather resistance and aging resistance; strong corrosion resistance, non-water absorption, almost no drop in voltage and volume resistivity in water and humid environment; after wrapping, insulating layer melts into one, never falling off, wrapping. Solid, neat and clean.
Product Coding：
W230（120 Volumes/Box）
Scope of application：
The main insulation of 600-69000V solid dielectric cable is restored; the main insulation is made when the stress cone is made on the cable up to 35000V solid dielectric cable; the protection of intermediate joints and terminals is restored; the moisture-proof sealing of electrical connections; bus insulation; and the tightness of cable ends.
Usage：
Remove the isolation film from the self-adhesive tape, fully stretch, and wrap it half-lap around the object that needs insulation or waterproof sealing protection. Then wrap another layer of PVC adhesive tape around the outer layer of the self-adhesive tape as the protective layer.
Storage：
Under normal temperature and ventilation conditions, the self-made date is valid for 3 years.
Important Statement：
Wanshida Group shall not be liable for any loss or liability arising from the use of the product beyond the scope of application.
Product Performance：

Tear strength：	≥1.2MPa
Elongation at break：	≥800%
Insulation Resistivity：	1x1012 Ω•cm
Breakdown Strength：	≥18kV/mm
Self-cohesion：	≥5.0N

 
The above data are the general average value for reference only. The actual product data are based on the actual test results.